The Collectors’ Guide to A. Lange & Söhne Double Split and Triple Split
A marketing theory Blue Ocean Strategy, by the INSEAD professors Chan Kim and Renée Mauborgne, emphasizes the value innovation – differentiation with low cost to sail into uncharted waters where the innovator becomes the go to address for the newly developed product. It focuses on not to fight on a certain dimension, but rather conquering an area. Although the concept has major flaws in its offering as it seems to be descriptive rather than being prescriptive and mostly evaluates success through its own lens, I like this highly sticky concept of being the only one in a certain area and try to apply whenever possible. More importantly, I draw great similarities to the subject of the article: Double Split and Triple Split of A. Lange & Söhne.
Following article starts with the original, platinum 404.035 Double Split and examines the watch from the case and the dial perspective. Further takes an in-depth journey to the caliber L001.1 of the Double Split and explains how it works. Next section puts the Double Split in pink gold (404.032) under the loupe as well as the special editions and its market. Finally, you can find an in-depth guide for the Triple Split.
Brief History of Chronograph
The chronograph’s history goes centuries back to Louis Moinet, the inventor of the mechanism (he named it as compteur de tierces – please find more about it here) in 1816. It was a true chronograph in every sense of the word with impressive technical achievements. Subsequently, the chronograph was further developed by many other watchmakers. One example to note here is Joseph Thaddäus Winnerl – inventor of the split seconds chronograph mechanism who was also the tutor of Ferdinand Adolph Lange in Paris from 1835 to 1840.
Following century, the chronograph was perfected by the likes of Victorin Piguet. However, as might be unexpected for many today, it was Longines in 1913 who put the chronograph mechanism into a wristwatch with an in-house caliber 13.33Z for the first time. A staggeringly charming caliber crafted for the use of the rude military. Following, it was Breitling who patented the use of separate start, stop and reset buttons and again Longines incorporating the first flyback function in the late 1920s.
Throughout the next decades the manufacturers relied on outsourced movements for their most precious pieces. The name Valjoux has to be uttered here, as they were the one powering some of the most beautiful watches ever made from the period – including Patek Philippe’s famous 13-130 within the 1518. Towards the end 60s, the brands formed joint ventures to produce chronograph movements. El Primero from Zenith – Movado or The Chronomatic from the venture between Heuer, Breitling, Hamilton and the specialist Dépraz & Co…. However; the arrival of the quartz crisis put the brands into survival mode and kicked R&D out of the bedroom.
After the devastating crisis, the world had to wait until the late 1990s to see a newly developed chronograph caliber. This was Blümlein and his team exploiting an uncharted area and starting a new trend called in-house movement development. Following 9 short years after the re-birth, A. Lange & Söhne introduced the caliber L951.1 of the Datograph. To many, the most beautiful chronograph movement ever made. It was a complete surprise for almost everyone. How could a small German brand come up with such a complex and beautiful caliber where there are names like Patek Philippe, Audemars Piguet and Vacheron Constantin?
Albeit, only after a couple of years we learnt that A. Lange & Söhne had even bigger plans to change the game forever.
Double Split Platinum (404.035)
Watchmaking is a legacy technology where working with the old methods is still celebrated. Apart from the societal hype and marketing surrounding the industry, certain brands and models, it is the human instinct that appreciates art, craft and nostalgia that breathes life into watchmaking. Even though the technology has enabled many advancements – minor and major – the basic principles for many applications used in watches today, be it the escapement or the complication construction such as chronograph, are centuries old.
Thus, in order to differentiate, every now and then brands unveil so called innovations. Alas, many fall into what I call just marketing gimmicks, contributing neither to longevity, nor accuracy. It is understandable, though. Modern mechanical watchmaking still has to function within the borders of nostalgia and mechanics; thus innovation brought to the watch industry is nothing but an incremental innovation, doing better what we already do. However, within these strict boundaries, some brands or watchmakers step up and manage to bring something extraordinary. One of them is A. Lange & Söhne’s Double Split.
A. Lange & Söhne introduced the Double Split in 2004. It is the world’s first double rattrapante chronograph; which means, in addition to the traditional split-seconds, it houses a second minute counter. Both pairs of hands can be stopped separately and the stopped hands can catch the running hands with a push. This unprecedented mechanical marvel came from a 15 years old start-up brand and was a clear message on what A. Lange & Söhne represents.
A Thick Case
Double Split is the reason for many watch enthusiasts to call A. Lange & Söhne’s watches as hockey pucks. Indeed, measuring at 43.2 mms in diameter and 15.3 mms in thickness with a signature solid, dense construction and heavily engineering inspired design, the watch deserves such moniker.
Lange Double Split’s lugs are rather short and thick, the bezel is concave to form a continuum to the tachymeter scale ring, and the caseback has that usual stepped construction – Lange’s design illusion especially utilized in thick watches. As a result, Double Split is certainly not the most comfortable watch in the world and rather impossible without a deployant buckle. Yet; for some who likes a “presence” there are not much better options.
All in all, it is safe to say that the case is exceptionally engineered, most certainly meeting the Blümlein’s requirement of I want the owner to get the feeling of closing of a door of a Mercedes and Walt Odets’ infamous saying it is a watch (Saxonia) that only an engineer could love. The soldered lugs deliver a tactile feeling rather than a flowing romantic, further brings out the masculinity. Every detail spooking from the narrowest angles, and every bit either brushed or polished to form a strong contrast and flow through the band, the Double Split’s case is as magnificent as it is uncomfortable.
As opposed to most other watches from the brand, the Double Split’s caseback is relief engraved; which further accentuates the depth and over-engineered nature of the watch just perfectly.
The lug width of the Double Split is 22ms and the buckle is 18 mms and it weighs around 200 grams even without the bracelet.
A Deep Dial
Rather than being something entirely different, Double Split builds its own identity over the original Datograph’s with great success. I think there are two reasons for such resemblance. First is the base movement constraints (more on that below) and the second one is that I believe A. Lange & Söhne wanted to build on the success of the original Datograph. Instead of offering a new line, they opted to attach the development over an already established identity, which is a great product launch strategy.
Datograph measures 39 mms in diameter whereas Double Split 43.2 mms. Hence, the proportions of the sub-dials had to be arranged accordingly. It can be easily observed that the sub-dials are significantly bigger than the Datograph to reduce the space above 6 o’clock. The big date was replaced by a very useful power-reserve indicator at 12 o’clock. The remaining empty area is nicely covered with a gold Roman XII and nicely balanced with below the center sub-dials. As the same with the Datograph, the applied Roman Numerals create an equilateral triangle, forming a focus point.
The galvanized solid silver dial is constructed on three steps. From outside to inside: Tachymeter scale, main dial and sub-dials. Indeed, the front side does justice to the movement depth… A. Lange & Söhne’s black on the Double Split is simply stunning. It is neither enamel nor lacquer; yet shockingly lively. The panda look blesses the Mighty Double Split (hats off to @GaryG_1) with a rather sporty look and broad, lumed hands further enhances the appearance. The color harmony conceived by the gold and blued steel hands are just perfect against the deep black background. The color arrangement also enhances the legibility. The hands are also slightly curved rather than just being straight, which undoutabtedly would cherish the careful eyes.
As a final note; rarely known, Double Split (404.035) went through a facelift between its introduction in 2004 during Geneva Watch Salon and later on production. Even though the concept was extremely well received, according to the people who were there at the time, the design was not optimal. Lange collected the feedback of retailers and modified the piece until the production.
Easily noticeable; the power reserve indicator as well as the tachymeter scale was overhauled. The logo was moved to the tachymeter scale and the “Double Split” within the sub-dial to the center. Moreover, apparently Lange wanted to match the beat rate (6 ticks every second) with the hash marks between seconds and this made the dial a bit crowded; thus removed during the overhaul. In my opinion, it resulted in a much better watch.
Warning, this is going to be as deep as the movement itself.
As mentioned, A. Lange & Söhne Double Split is the world’s first double rattrapante chronograph. It achieves something that was never done before. Understanding how it works, albeit complex, is a true joy. The article starts with a focus on aesthetics, and further moves onto technical explanation.
For me, the Double Split’s caliber L001.1 most certainly the most aesthetically constructed, finished, and joyful movement to look at. It is a waltz between the splendidly curved levers, hue of variety of metals and exemplary craftsmanship. Yes, it is unbearably thick for many; but it is valuable exactly because of this. There are many thick movements around, yet none is this impressive, immersive and characteristic. I may go as far and say, this is Michelangelo’s David of mechanical watch movements.
It bears all the A. Lange & Söhne and Glashütte watchmaking hallmarks such as hand-engraved balance cock, gold chatons, blued screws etc. with a myriad of finish techniques. The interplay between straight grained chronograph levers to flat polished column wheel, chamfered edges is just remarkable. It is a mechanical sculpture – nothing less. Although the modular construction blocks the beating heart view of the balance wheel and its engraved balance cock; it is a worthy sacrifice to observe hundreds of moving parts with full exposure.
The Double Split’s caliber L001.1 measures 30.5 mms in diameter and 9.5 mms in thickness. It beats at a traditional 3 Hz and boasts 38 hours of power reserve. It also houses the first in-house balance spring of A. Lange & Söhne.
Before diving into the working principles, first, let’s see how we operate the Double Split:
The pusher at 2 o’clock starts / stops both of the chronograph hands. While running, the pusher at 10 o’clock splits the chronograph and minute hands and the gold hand continues to run. If you push the 10 o’clock pusher once again, the silver hand (as well as the blued minute hand) catches the gold hand for a new measurement. The pusher at 4 o’clock is simply for the flyback or reset function. So, when operating this marvel of engineering, we’ll mostly deal with the pushers at 10 and 2 o’clock directions.
Now the important question: How the hell does it work?
Caliber L001.1 was conceived in 2001, right after the introduction and the success of the Datograph. It is basically a modular construction on three layers. Below the three-quarter plate we have the gear-train, chronograph in the middle section and the double rattrapante addition on the third; which is easily identifiable with the so-called twin towers. However, in order to comprehend how the splitting works, we must understand the chronograph.
The processor of the chronograph is the column-wheel. It is the link between the pushers and the function we see. If you look closer, you are going to see that the clutch lever, zero-reset lever and the operating lever are all connected to it. The chronograph becomes active when the operating parts of the mechanism connects to the running movement. When the user presses the start button, column wheel spins forward and pushes the clutch lever’s tail in between the pillars. With this motion, the clutch lever moves horizontally and meshes with the chronograph wheel. To stop, pressing the button again, the clutch lever sits on the pillar again and disengages from the chronograph mechanism.
The flyback lever works with a similar principle. A heart lever presses against the claw shaped flyback lever, which contacts the heart cam on top of the chronograph seconds’ wheel and the hand on the dial side flies back to zero.
The Double Split however, simply has two of these and the interaction is something to behold.
The bridge at 1 o’clock is for rattrapante minutes and the one in the center is for rattrapante seconds. A rattrapante chronograph has two hands that sit on interlocking shafts. In the case of the double rattrapante mechanism, this arrangement exists twice: two seconds hand and two minutes hand. These two shafts rotate together. Simply put, when you activate the rattrapante, you actually block the rattrapante gear. Upon release, just like the flyback function mentioned above, the rattrapante wheel spins to rejoice the main chronograph hand and sits on top of it.
I exerted the following information from A. Lange & Söhne’s 2012 Catalogue and my conversation notes with the master watchmakers who build these pieces:
The hollow chrono centre arbor on the outside (1) carries the chrono sweep-seconds hand. It is driven by the chronograph centre wheel (2 – the same wheel at the l951.1 diagram two above). It is rigidly connected to the zero-reset heart cam (3 – also in the l951.1 diagram) of the chronograph centre wheel and the heart cam (4) of the rattrapante center wheel. The heart cam makes it possible to reset a hand to zero by taking the shortest route possible (left or right) – or as the case with rattrapante, to synchronize it with the chronograph sweep-seconds hand.
The rattrapante hand, which is superimposed on the chrono sweep-seconds hand, is attached to the inner rattrapante centre harbor. This arbor holds the disengagement wheel (6) and the rattrapante centre wheel (7) to which the rattrapante heart lever (8) is attached.
Start and Stop:
In the basic position, the rattrapante heart lever (8) is pressed against the flat side of the heart cam (4) of the rattrapante wheel via a spring (9). This connects the otherwise separately movable chrono centre arbor (1) and the rattrapante center arbor (5). So that when the chronograph hand starts to move, rattrapante moves as well.
When the rattrapante pusher (the one at 10 o’clock and 10 in the diagram) is activated, the column wheel (11) rotates one step. Now, the rattrapante split-seconds clamp (12) closes and arrests the rattrapante centre wheel (7). An arresting spring (13) concurrently seizes and stops the rattrapante minute counter while the two chronograph hands (seconds and minutes) continue to move. When the pusher is pressed again, the rattrapante clamp (12) opens and the minute arresting spring (13) is pushed aside. Thus, the rattrapante hand instantly joins the running chronograph hands.
In addition, Double and Triple Split boasts a patented “disengagement mechanism”. A. Lange & Söhne describes the system as follows:
In the regular rattrapante mechanisms such as Tourbograph or 1815 Rattrapante Perpetual Calendar, as the chronograph hands continue to run while the rattrapante hands are stopped, the rattrapante heart lever (8) would rub against the rattrapante heart cam (4) of the rattrapante center wheel, which continues to run along with the chrono centre arbor (1). This in return causes friction therefore loss of amplitude.
Here, actuating the pusher (10) also pivots the disengagement segment (14) inward. This motion rotates the disengagement wheel (6) by about 20 degrees in the other direction. The bottom side of the wheel carries a pin (15) that when rotated in the opposite direction swings the rattrapante heart lever (8) out of the engagement zone of the heart cam (4) of the rattrapante center wheel thus the chronograph runs smoothly.
On top of all these mind boggling engineering, Double Split features a flyback system and aprecisely jumping minute counter. Within the history of more than 180 years, Double Split and later on the Triple Split are the two most advanced chronographs, ever.
PS: The disengagement mechanism is not exclusive to A. Lange & Söhne. Patek Philippe also has a brilliant example on their caliber CHR 29-535 PS.
Double Split Pink Gold (404.032)
Following 6 successful years, A. Lange & Söhne discontinued the platinum Double Split and introduced the facelifted pink gold version in 2010.
As mentioned in my Datograph Up/Down article, during the late 2000s and early 2010s, A. Lange & Söhne went through a management change. This in return brought an easily noticeable shift in design. It was now less baroque so to speak. Notwithstanding, the colors of the new Double Split are just fantastic.
For example, other than the Double Split, the brand updated 1815 chronograph as well as the Datograph Perpetual. A careful look reveals that the brand wanted to “modernize” itself. Double Split lost its Roman Numerals (as happened to Datograph in 2012), 1815 chronograph its vintage pulsometer… These adjustments brought a cleaner look, alas the in exchange of a big part of their character. Still beautiful but not as striking. The second generation Double Split is a rather romantic piece – albeit that is something that the Double Split should not have been.
The case structure as well as the mechanics stayed the same.
Buying a Lange Double Split
When introduced in 2004, the retail for the reference 404.035 was $97k. It went through a hike of about 30% in 6 years and discontinued at $126.8k. Indeed, pricing the innovation is rather difficult and the price looks understandable even better if one accounts the competition. Sadly, the pre-owned market prices did not follow this hike.
Throughout the years, the pre-owned platinum Double Split prices have been stable between $60 – 70k. However, as of February 2021, the prices have been slowly creeping up. As with most other Lange pieces though, the prices were much higher prior to 2010s than they are now. Which means that with current prices, Double Split in platinum is an absolute bargain. It is a lot of watch for the money.
I believe the foremost reason for the lack of demand is comfort. Double Split is not an easily wearable watch. Most collectors I had the honor to know of buy this spectacular piece for the engineering and for display rather than putting on the wrist. This in return, shrinks the potential market size therefore prices. It is like 50 mms in diameter and 20 mms thick A. Lange & Söhne Grand Complication; unfortunately not a wristwatch.
To my knowledge, there is no quantifable market for the pink gold version.
One final note: There is a unique stainless steel example made for an A. Lange & Söhne executive around 2008 which was sold through Christie’s in 2013 for CHF 461K.
Triple Split (424.038)
In watchmaking, there are not many complications or technical advancements where one manufacture enjoys the monopoly. Of course, some enjoys superiority over other such as Patek Philippe minute repeaters. Yet, it is not 1931 anymore. Today, even though many brands have patents over different mechanisms, there are way arounds. Among few exceptions, there is this one here, the Double Split and its successor: Triple Split. Since 2004, no other manufacture released (or have not tried) something similar.
You’d know the famous motivational quotes revolving around “the only competition that matters is the one takes place within yourself”… Apparently, A. Lange & Söhne took this extremely seriously. They upped the ante where they were the only players just to stay true to their identity, to Never Stand Still. In 2018, this persistance brought the most advanced chronograph ever made, the Triple Split.
Introduced in white gold with a limitation of 100, Triple Split is in line with the brand’s metal/dial color code. The power reserve indication is now at 6 o’clock to open up space to the new hours indication. The legibility is significantly improved with the blued steel hands contrast against white sub-dials and rhodium-plated hands. Apart from these, the dial structure is the same as its predecessor.
Triple Split’s case dimensions (apart from the 0.3 mms difference) as well as the structure are the same with the Double Split – 43.2 mms x 15.6 mms. Again, not the most comfortable but significantly lighter than the reference 404.035.
Triple Split is an improvement on the Double Split and splits not only the seconds and minute but hours too. Initially, you might have a hard time to positioning this as big of an innovation as the Double Split and perhaps think that the hours addition is a bit more onto the “gimmicky” side of the innovation scale; which would not be that far from the truth. GaryG_1 says the Triple Split is “one split too many” and I agree to an extent. But this watch reveals its true innovation when one goes a bit deeper.
Despite the fact that the Triple Split houses an additional indication (hours), thus gear train for it and the 17 hours of power reserve increase (from 38 to 55), the caliber L132.1 measures just 0.3 mms thicker than its predecessor L001.1. In other words, it is much more efficient. This alone means so much to me than the additional hours indication. Because it shows me that A. Lange & Söhne indeed stays true to their identity and keep improving even without competition. This deserves an applause. One thing to note is that the hour indication does not jump rather creeps to the next.
The caliber L132.1 is nothing but a work of art as one would expect from an A. Lange & Söhne chronograph. Almost a copy of the Double Split’s L001.1 with an addition of the hours pillar. Between the two caseback views however, my choice definitely would be the Double Split as it is more exposed – thanks to the lack of the hours indication.
Due to its size, Triple Split is not the most comfortable watch around. Yet, it is somewhat balanced. The lugs’ curve helps the comfort tremendously as it pulls the strap down. However, it is not thicker than anything, too. Simply because there is nothing else to compare. To say something is thick, one must have a reference point of thinness and Triple Split stands as unique and with the just right size – until someone else comes along and makes it somehow thinner.
Still, it is one of the most impressive things I have ever seen in my life. One wishes to shrink and just wander within this metropol behind the sapphire glass.
Buying a Triple Split
As of October 2020, the MSRP for the Triple Split is $153k. Since its introduction more than 2 years ago, it has never been traded publicly. Sotheby’s Important Watches Hong Kong auction in 9th October 2020 is going to be the first public showdown for Triple Split. Please check here to see the price.
A. Lange & Söhne issued very rare special editions for Double Split – mainly for Singapore and Japanese markets such as Double Split Sincere or Tokyo Editions. Below please find some photos:
1- Skyeriding’s exceptional explanation of chronograph with his own drawings
3- Horomariobro‘s Instagram account with brilliant macro shots and slow motion videos to better grasp the working principles.
Home » The Encyclopedia »